SWUSB-U1, SWUSBU1, SW USB-U1, SW USBU1, SW USB-1, SW USB1 USB UPSTREAM PORT FILTERS/ESD PROTECTION

SWUSB-U1, SWUSBU1, SW USB-U1, SW USBU1, SW USB-1, SW USB1 USB UPSTREAM PORT FILTERS/ESD PROTECTION - PACUSB-U1, PACUSB-U2 and PACUSB-U3 compatible. One upstream USB port terminator, EMI filter and transient overvoltage protector in a single surfacemount package Saves board space and lowers manufacturing costs compared to discret solutions ESD protection to 30 kV contact discharge per MIL-STD-883D, method 3015 ESD protection to 15 kV contact discharge per IEC6100-4-2 international standard ESD protection and termination of USB port All USB peripherals ( PC printers, scanners, zip drives, etc.) PDAs / handheld PCs Digital cameras Wireless Handets MP3 PlayerCable Modems The SWUSB-U1, SWUSBU1, SW USB-U1, SW USBU1, SW USB-1, SW USB1 are single-channel USB upstream-port termination networks.The SWUSB-U1, SWUSBU1, SW USB-U1, SW USBU1, SW USB-1, SW USB1 integrate EMI/RFI filter components R1 and C1, as recommended by the USB specification. Because these are upstream USB devices, they are terminated with a single 1.5 kW pull-up resistor to V3.3 (R2). There are three options for the value of the series resistor R1: for SWUSB-U1, SWUSBU1, SW USB-U1, SW USBU1, SW USB-1, SW USB1, R1 = 15ohms. This series resistance plus the USB driver output resistance must be close to the USB cable's characteristic impedance of 45W (90W balanced) to minimze transmission line reflections. In addition, these parts provide a very high level of protection for sensitive electronic components components that may be subjected to electrostatic discharge (ESD). The input and output pins are designed and characterized to dissipate ESD strikes of 15kV safely, a level well beyond the maximum requirements of the IEC 61000-4-2 international standard.Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, all pins are protected for contact discharges to greater than 30kV. PACUSB-U1, PACUSB-U2, PACUSB-U3, PAC USB-U1, PAC USB-U2, PAC USB-U3



SEMICONWELL Integrated Passive Networks		USB UPSTREAM PORT FILTERS/ESD PROTECTION SWUSB203-15

FEATURES

APPLICATIONS

SCHEMATIC

One upstream USB port terminator, EMI filter and transient overvoltage protector in a single surfacemount package

Saves board space and lowers manufacturing costs compared to discret solutions

ESD protection for USB power (VBUS) and data lines (D+ and D-) to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns)

Low TVS operating voltage (5.25V)

Low leakage current

Small SC70-6L package

ESD protection and termination of USB port

All USB peripherals ( PC printers, scanners, zip drives, etc.)

PDAs / handheld PCs

Digital cameras

Wireless Handets

MP3 Player
Cable Modems

SHORT PRODUCT APPLICATION NOTE

The SWUSB203 is a combination EMI filter and line termination device with integrated TVS diodes for use on upstream USB ports. It is constructed using a proprietary technology that allows passive components and TVS diodes to be integrated in the same package. Each device will provide termination, filtering, and ESD protection for one upstream USB port. The SWUSB203 is an easily implemented solution for meeting the requirements of revision 1.1 of the Universal Serial Bus specification. Line termination is achieved with series resistors on both the D+ and D- USB lines. The value of series resistance added to the output impedance of the USB driver must be as close to possible to the 45W characteristic impedance of the cable (90W balanced) to minimize transmission line reflections. They are available with resistor values of 15W (SWUSB203-15), 22W (SWUSB203-22), and 33W (SWUSB203-33). The 1.5kW pull-up resistor is required by the USB specification to identify the equipment as either a full-speed (connected to D+ line) or low-speed (connected to Dline) device. The 47pF capacitors are required to bypass high frequency energy to ground and to control the edge rate of the USB signals. The TVS diodes provide ESD protection of both (D+ and D-) data lines and the voltage bus (VBUS). The TVS diodes on the input/output pins provide suppression of ESD voltages in excess of ±15kV (air discharge) and ±8kV (contact discharge) per IEC 61000-4-2, level 4. The TVS diode on the VBUS pin will suppress ESD discharges in excess of 25kV per IEC 61000-4-2.

SEMICONDUCTOR-THIN FILM MANUFACTURING PROCESS DESCRIPTION

Integrated passive networks are manufactured using advanced thin film technologies including ultra -stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film resistor technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. Semiconwell employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1W/sq to 10,000 W/sq. All Semiconwell's products are available in die form and as KGD, known good die and are ideal for high reliability hybrid and multi chip module applications. Besides thin film resistors, Semiconwell integrates capacitors, Schottky diodes, Zener diodes and transistors. Integrated passive and active networks are manufactured using Semiconwell's in house high reliability semiconductor manufacturing processes. All semiconductor devices employ precision doping via ion implantation, silicon nitride junction passivation, platinum silicided contacts and gold interconnect metallization for best performance and reliability. MNOS capacitors and Tantalum Nitride resistors are easily integrated with Schottky diodes to provide complete standard and custom RCD solutions. In die form, these products are ideal for hybrid and multi chip module applications. In packaged form, these products are the best solution where space and weight are a concern.

ABSOLUTE MAXIMUM RATINGS
Supply voltage	Operating Temperature	Storage Temperature	Max Package Power
5.5V	-40 to +125°C	-55 to +150°C	100mW

Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

ELECTRICAL CHARACTERISTICS
PARAMETER	VALUE	UNITS
TVS Reverse stand-off Voltage	<5.25	V
TVS Reverse Breakdown Voltage@I=1mA	min 6	V
TVS Reverse Leakage Current @Vr=5.25V,T=25°C,Between data pin (Din/out) and Ground	max.5	µA
TVS Reverse Leakage Current, Each line	max.1	µA
Series Resistance Rs±20% @ 25°C, Each line	min.13.5, typ.15, max.16.5	W
Pull up Resistance Rp±20% @ 25°C	min.1.35, typ.1.5, max.1.65	KW
Capacitance C1±20%@ 1MHz, 0VDC, 25°C	typ.47	pF
Total Capacitance @ 1MHz, 0VDC, 25°C	typ.60	pF
In-system ESD Withstand Voltage (V_ESD)
IEC 61000-4-2, air discharge method (I/O pins) (Notes 1,2)	±16	kV
IEC 61000-4-2, contact discharge method (V_3.3 pin) (Notes 1,2)	±10	kV
Note 1: ESD applied to input/output VBUS pins with respect to GND, one at a time. Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin (i.e. if ESD is applied to pin 1, then clamping voltage is measured at pin 6). Unused pins are open. Note 2: These parameters guaranteed by design.

PIN DESCRIPTION
LEAD	NAME	DESCRIPTION
1	Din/out	The USB controller side of the D+ or D- bidirectional transmission line of the differential pair defined by USB standards.
2	GND	The ground reference .
3	Din/out	The USB controller side of the D+ or D- bidirectional transmission line of the differential pair defined by USB standards.
4	Din/out	The connector side of the D+ or D- bidirectional transmission line of the differential pair defined by USB standards.
5	VBUS	Voltage bus.
6	Din/out	The connector side of the D+ or D- bidirectional transmission line of the differential pair defined by USB standards.

GENERAL DIE INFORMATION
Substrate	Thickness (mils)	Die size (mils)	Bonding pads	Backside metal
SiO₂ / Silicon	10±2	90 x 60 ±3	4x4 mils, 3mm thick, 99.99% electroplated gold with a TiW barrier	Au/Si compatible with eutectic and conductive epoxy die attach.
All Semiconwell products are available in die form for chip and wire hybrid circuits and multi chip modules applications. Typical delivery for standard die products is 3-4 weeks ARO. For Chip Scale Packaged (CSP) devices consult factory for an update on availability of certain products.

DIODES	RESISTORS	CAPACITORS
Diodes offers basic ESD protection, with low forward voltage and low power dissipation. Diodes are small physically resulting low junction capacitance and low loading capacitance.	Resistive material is ultra stable TaN with low TCR <75ppm/°C typical. For Rsq<10W/sq and Rsq>500W/sq, the resistive material is proprietary. Power rating/resistor max 100mW for R<1KW and 25mW for R>1KW. Standard tolerance is ±5%.	Silicon nitride dielectric, MNOS capacitors exhibit high stability, low temperature coefficients, low leakage <10nA and high BV>50V.

DIE LAYOUT	PACKAGE PIN OUT

Vin=1,3,4,6
GND=2
VBUS=5

STANDARD PRODUCTS ORDERING INFORMATION

Rs(W)	SC70-6	SOT26	SOT326	BARE DIE
15	SWUSB203-15-SC70	SWUSB203-15-SOT26	SWUSB203-15-SOT326	SWUSB203-15-6BD

SW PART #	QUANTITY	SOT26	U/P($)	SOT326	U/P($)	BARE DIE	U/P($)
SWUSB203-15	5,000pc	-SOT26		-SOT326		-6BD
SWUSB203-15	10,000pc	-SOT26		-SOT326		-6BD

For products sold as bare tested die or known good die KGD, minimum order is 5000pc. Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For special die level KGD requirements, different packaging or custom configurations, contact sw_sales@semiconwell.com

Delivery for packaged RCD standard products is 6-8 weeks ARO. Certain items may be available from stock. For standard products available from stock, there is a minimum line item order of $250.0. Inventory is periodically updated. For 2500pc or larger orders, all surface mount packaged devices are shipped in tape on reel (T/R). For smaller quantities, it may vary. Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. On line Orders have to be verified, accepted and acknowledged by Semiconwell sales department in writing before, becoming non cancelable binding contracts.

Semiconwell guarantees continuous supply and availability of any of it's standard products provided minimum order quantities are met.

SEMICONWELL has made every effort to have this information as accurate as possible. However, no responsibility is assumed by SEMICONWELL for its use, nor for any infringements of rights of third parties which may result from its use. SEMICONWELL reserves the right to revise the content or modify its product line without prior notice. SEMICONWELL products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent.

	Semiconwell P/N	Quantity	E-mail
Receive Instant Quote