RC TF Tapped Filter Networks RC Network Suitable for PCMCIA interface cards Stable resistor capacitor network No signal delay multiple EMI/RFI protection lines/package Saves board space and component cost EMI/RFI Filter Low pass Filter Terminations This integrated thin film resistor-capacitor network is designed to suppress EMI/RFI noise at I/O ports of personal computers and peripherals, workstations, Local Area Network (LAN), Asynchronous Transfer Mode (ATM), Wide Area Network (WAN), etc. The RC TF series solution improves performance and reduces assembly cost on passive components. These products are manufactured using advanced thin film technologies including ultra-stable and selfpassivating Tantalum Nitride resistors, gold interconnect metalization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. In die form, these products are ideal for hybrid and multichip module applications. In packaged form, these products are the best solution where space and weight are a concern. Integrated passive networks are manufactured using advanced thin film technologies including ultra-stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film resistor technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. Semiconwell employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1W/sq to 10,000 W/sq. All Semiconwell's products are available in die form and are ideal for high reliability hybrid and multi chip module applications.

 
 
SEMICONWELL
Integrated Passive Networks
  RC TF Tapped Filter Resistor Capacitor Network
SWTF XXX/XXX - 14
 
 

FEATURES
APPLICATIONS
SCHEMATIC
Suitable for PCMCIA interface cards
Stable resistor capacitor network
No signal delay
5 EMI/RFI protection lines/package
Saves board space and component cost
EMI/RFI Filter
Low pass Filter
Terminations
schematic

SHORT PRODUCT APPLICATION NOTE
This integrated thin film resistor-capacitor network is designed to suppress EMI/RFI noise at I/O ports of personal computers and peripherals, workstations, Local Area Network (LAN), Asynchronous Transfer Mode (ATM), Wide Area Network (WAN), etc. The RC TF series solution improves performance and reduces assembly cost on passive components. These products are manufactured using advanced thin film technologies including ultra-stable and selfpassivating Tantalum Nitride resistors, gold interconnect metalization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. In die form, these products are ideal for hybrid and multichip module applications. In packaged form, these products are the best solution where space and weight are a concern.

SEMICONDUCTOR-THIN FILM MANUFACTURING PROCESS DESCRIPTION
Integrated passive networks are manufactured using advanced thin film technologies including ultra -stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film resistor technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. Semiconwell employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1 W/sq to 10,000 W/sq. All Semiconwell's products are available in die form and as KGD, known good die and are ideal for high reliability hybrid and multi chip module applications. Besides thin film resistors, Semiconwell integrates capacitors, Schottky diodes, Zener diodes and transistors. Integrated passive and active networks are manufactured using Semiconwell's in house high reliability semiconductor manufacturing processes. All semiconductor devices employ precision doping via ion implantation, silicon nitride junction passivation, platinum silicided contacts and gold interconnect metallization for best performance and reliability. MNOS capacitors and Tantalum Nitride resistors are easily integrated with Schottky diodes to provide complete standard and custom RCD solutions. In die form, these products are ideal for hybrid and multi chip module applications. In packaged form, these products are the best solution where space and weight are a concern.

ABSOLUTE MAXIMUM RATINGS
Capacitor Bv Fc @ 3dB Max Power dissipation
50V 1062MHz 50mW@70°C/channel

Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

STANDARD VALUES CUT OFF FREQUENCY PART MARKING
R(W) 10% C(pF) 10% fc @ 3dB (MHz) SW PART# RC CODE Tol 1% Tol 5% Tol 10%
10 15 1062 SWTF 100/150 -1% -5% -10%
33 100 48 SWTF 330/101 -1% -5% -10%
33 250 19 SWTF 330/251 -1% -5% -10%
33 47 103 SWTF 330/470 -1% -5% -10%
39 220 19 SWTF 330/221 -1% -5% -10%
47 47 72 SWTF 470/470 -1% -5% -10%
75 50 42 SWTF 750/500 -1% -5% -10%
100 100 16 SWTF 101/101 -1% -5% -10%
100 150 11 SWTF 101/151 -1% -5% -10%

GENERAL DIE INFORMATION
Substrate Thickness (mils) Die size (mils) Bonding pads Backside metal
SiO2 / Silicon 10±2 90 x 60 ±3 4x4 mils, 3mm thick, 99.99% electroplated gold with a TiW barrier Au/Si compatible with eutectic and conductive epoxy die attach.
All Semiconwell products are available in die form for chip and wire hybrid circuits and multi chip modules applications. Typical delivery for standard die products is 3-4 weeks ARO. For Chip Scale Packaged (CSP) devices consult factory for an update on availability of certain products.

CONDUCTORS RESISTORS CAPACITORS
The bonding pads of the resistors are 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. Resistive material is ultra stable TaN with low TCR <75ppm/C typical. For Rsq<10W/sq and Rsq>500W/sq, the resistive material is proprietary. Power rating/resistor max 100mW for R<1KW and 25mW for R>1KW. Standard tolerance is ±5%. Silicon nitride dielectric, MNOS capacitors exhibit high stability, low temperature coefficients, low leakage <10nA and high BV>50V.

DIE LAYOUT PACKAGE PIN OUT
layout / design pending schematic
Vin=3,4,5,6,11,12,13,14
Vss=die backside
Vss=1,8,9,16
Vdd=2,7,10,15

STANDARD PRODUCTS ORDERING INFORMATION

SW PART # QUANTITY SOIC-14 U/P($) TSSOP-14 U/P($) PDIP-14 U/P($) BARE DIE U/P($)
SWTF/RCCODE-10%   5,000pc -14SO   -14TS   -14DP   -14BD  
SWTF/RCCODE-10% 10,000pc -14SO   -14TS   -14DP   -14BD  
SWTF/RCCODE-5%      5,000pc -14SO   -14TS   -14DP   -14BD  
SWTF/RCCODE-5%    10,000pc -14SO   -14TS   -14DP   -14BD  
SWTF/RCCODE-1%      5,000pc -14SO   -14TS   -14DP   -14BD  
SWTF/RCCODE-1%    10,000pc -14SO   -14TS   -14DP   -14BD  
For products sold as bare tested die or known good die KGD, minimum order is 5000pc. Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For special die level KGD requirements, different packaging or custom configurations, contact sw_sales@semiconwell.com

INSTANT QUOTE
Semiconwell P/N Quantity E-mail    
 

Delivery for packaged resistor-capacitor networks standard products is 4-6 weeks ARO. Certain items may be available from stock. For standard products available from stock, there is a minimum line item order of $250.0. Inventory is periodically updated. For 2500pc or larger orders, all surface mount packaged devices are shipped in tape on reel (T/R). For smaller quantities, it may vary. Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. On line Orders have to be verified, accepted and acknowledged by Semiconwell sales department in writing before, becoming non cancelable binding contracts.

Semiconwell guarantees continuous supply and availability of any of it's standard products provided minimum order quantities are met.

SEMICONWELL has made every effort to have this information as accurate as possible. However, no responsibility is assumed by SEMICONWELL for its use, nor for any infringements of rights of third parties which may result from its use. SEMICONWELL reserves the right to revise the content or modify its product line without prior notice. SEMICONWELL products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent.

Home Product Tree Tech. Support Print PDF Packages Request Quote Inventory Place Order Contact sales