PACDN3401C, PAC DN3401C same as SWDN3401, SW DN3401 SINGLE TRANSIENT VOLTAGE SUPRESSOR 5V, 0402 SMD, 2 CONTACTS manufactured by SEMICONWELL SINGLE TRANSIENT VOLTAGE SUPRESSOR 5V, 0402 SMD, 2 CONTACTS SWDN3401C FEATURES Single channel voltage suppressor in a surface mount EIA standard 0402-sezed device Compact 0402 size saves board space and eases layout in area critical applications compared to traditional wire bonded IC packages In-system ESD protection to ±30KV contact discharge per IEC 61000-4-2 International ESD Standard Only 1nA leakage at 3.3V (typical) APPLICATIONS Cell phones Wireless Handsets Palmtop PCs Handheld PCs / PDAs Notebook PCs Set-top box audio and video ports SHORT PRODUCT APPLICATION NOTE The SWDN3401C is a transient voltage suppressor that is ideal for very high level protection for sensitive 5V electronic components that may be subjected to electrostatic discharge (ESD). The bipolar configuration provides symetrical ESD protection in cases where nodes with AC signals are present. The devices is designed and characterized to safely dissipate ESD strikes at ±30KV contact discharge, well beyond the maximum requirements of the IEC 61000-4-2 international standard (Level 4, 8KV contact discharge). Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, signals pins are protected for contact discharges to greater than ±30KV. SEMICONDUCTOR-THIN FILM MANUFACTURING PROCESS DESCRIPTION Integrated passive networks are manufactured using advanced thin film technologies including ultra -stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film resistor technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. Semiconwell employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1W/sq to 10,000 W/sq. All Semiconwell's products are available in die form and as KGD, known good die and are ideal for high reliability hybrid and multi chip module applications. Besides thin film resistors, Semiconwell integrates capacitors, Schottky diodes, Zener diodes and transistors. Integrated passive and active networks are manufactured using Semiconwell's in house high reliability semiconductor manufacturing processes. All semiconductor devices employ precision doping via ion implantation, silicon nitride junction passivation, platinum silicided contacts and gold interconnect metallization for best performance and reliability. MNOS capacitors and Tantalum Nitride resistors are easily integrated with Schottky diodes to provide complete standard and custom RCD solutions. In die form, these products are ideal for hybrid and multi chip module applications. In packaged form, these products are the best solution where space and weight are a concern. ABSOLUTE MAXIMUM RATINGS Storage Temperature Range -65 to +150 °C STANDARD OPERATING CONDITIONS Operating Temperature Range -40 to +85 °C Stresses beyond listed absolute maximum ratings may cause permanent damage to the device. ELECTRICAL CHARACTERISTICS , TA=-40 to 85 °C unless otherwise specified PARAMETER VALUE UNITS Reverse Stand-off Voltage , I=10mA min ±5.9 V Diode Leakage Current, 3.3V across the device,TA=25 °C typ. 1 max 100 nA Signal Clamp Voltage, ILOAD=10mA Positive Clamp min. 6.0 typ. 7.5 max. 9.2 V Negative Clamp min. -9.2 typ. -7.5 max. -6.0 V In-system ESD Withstand Voltage,Note 2 a)Human Body Model, MIL-STD-883,mETHOD 3015 b)Contact Discharge per IEC 61000-4-2 Level 4 min.±30 V min. ±30 V Clamping Voltage during ESD Discharge MIL-STD-883 (Method 3015), 8KV , Note 2 Positive Transients Negative Transients typ. +13 V typ. -13 V Capacitance, VIN=0V DC, f=1MHz typ. 45 max. 65 pF GENERAL DIE INFORMATION Substrate Thickness (mils) Die size (mils) Bonding pads Backside metal SiO2 / Silicon 10±2 40 x 20 ±3 4x4 mils, 3mm thick, 99.99% electroplated gold with a TiW barrier Au/Si compatible with eutectic and conductive epoxy die attach. All Semiconwell products are available in die form for chip and wire hybrid circuits and multi chip modules applications. Typical delivery for standard die products is 3-4 weeks ARO. For Chip Scale Packaged (CSP) devices consult factory for an update on availability of certain products. DIODES RESISTORS CAPACITORS The diodes offer basic ESD protection, with low forward voltage, low leakage and low power dissipation in OFF state. Ultra stable TaN with low TCR <75ppm/°C typical. For Rsq<10W/sq and Rsq>500W/sq, resistive material is proprietary. Power rating/resistor max 100mW for R<1KW and 25mW for R>1KW. Standard tolerance is ±5%. Silicon nitride dielectric, MNOS capacitors exhibit high stability, low temperature coefficients, low leakage <10nA and high BV>50V. For products sold as bare tested die or known good die KGD, minimum order is 5000pc. Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For special die level KGD requirements, different packaging or custom configurations, contact sw_sales@semiconwell.com Delivery for packaged RCD standard products is 6-8 weeks ARO. Certain items may be available from stock. For standard products available from stock, there is a minimum line item order of $250.0. Inventory is periodically updated. For 2500pc or larger orders, all surface mount packaged devices are shipped in tape on reel (T/R). For smaller quantities, it may vary. Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. On line Orders have to be verified, accepted and acknowledged by Semiconwell sales department in writing before, becoming non cancelable binding contracts. Semiconwell guarantees continuous supply and availability of any of it's standard products provided minimum order quantities are met.

 
 
SEMICONWELL
Integrated Passive Networks
  SINGLE TRANSIENT VOLTAGE SUPRESSOR 5V, 0402 SMD, 2 CONTACTS
SWDN3401C
 
 

FEATURES
APPLICATIONS
SCHEMATIC
Single channel voltage suppressor in a surface mount EIA standard 0402-sezed device
Compact 0402 size saves board space and eases layout in area critical applications compared to traditional wire bonded IC packages
In-system ESD protection to ±30KV contact discharge per IEC 61000-4-2 International ESD Standard
Only 1nA leakage at 3.3V (typical)
Cell phones
Wireless Handsets
Palmtop PCs
Handheld PCs / PDAs
Notebook PCs
Set-top box audio and video ports

SHORT PRODUCT APPLICATION NOTE
The SWDN3401C is a transient voltage suppressor that is ideal for very high level protection for sensitive 5V electronic components that may be subjected to electrostatic discharge (ESD). The bipolar configuration provides symetrical ESD protection in cases where nodes with AC signals are present. The devices is designed and characterized to safely dissipate ESD strikes at ±30KV contact discharge, well beyond the maximum requirements of the IEC 61000-4-2 international standard (Level 4, 8KV contact discharge). Using the MIL-STD-883D (Method 3015) specification for Human Body Model (HBM) ESD, signals pins are protected for contact discharges to greater than ±30KV.

SEMICONDUCTOR-THIN FILM MANUFACTURING PROCESS DESCRIPTION
Integrated passive networks are manufactured using advanced thin film technologies including ultra -stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film resistor technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. Semiconwell employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1W/sq to 10,000 W/sq. All Semiconwell's products are available in die form and as KGD, known good die and are ideal for high reliability hybrid and multi chip module applications. Besides thin film resistors, Semiconwell integrates capacitors, Schottky diodes, Zener diodes and transistors. Integrated passive and active networks are manufactured using Semiconwell's in house high reliability semiconductor manufacturing processes. All semiconductor devices employ precision doping via ion implantation, silicon nitride junction passivation, platinum silicided contacts and gold interconnect metallization for best performance and reliability. MNOS capacitors and Tantalum Nitride resistors are easily integrated with Schottky diodes to provide complete standard and custom RCD solutions. In die form, these products are ideal for hybrid and multi chip module applications. In packaged form, these products are the best solution where space and weight are a concern.

ABSOLUTE MAXIMUM RATINGS
PARAMETER RATING UNITS
Storage Temperature Range
-65 to +150 °C
STANDARD OPERATING CONDITIONS
PARAMETER RATING UNITS
Operating Temperature Range
-40 to +85 °C

Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.

ELECTRICAL CHARACTERISTICS , TA=-40 to 85 °C unless otherwise specified
PARAMETER VALUE UNITS
Reverse Stand-off Voltage , I=10mA
min ±5.9
V
Diode Leakage Current, 3.3V across the device,TA=25 °C
typ. 1 max 100
nA
Signal Clamp Voltage, ILOAD=10mA
Positive Clamp
Negative Clamp

min. 6.0 typ. 7.5 max. 9.2
min. -9.2 typ. -7.5 max. -6.0

V
V
In-system ESD Withstand Voltage,Note 2
a)Human Body Model, MIL-STD-883,mETHOD 3015
b)Contact Discharge per IEC 61000-4-2 Level 4

min.±30
min. ±30

V
V
Clamping Voltage during ESD Discharge MIL-STD-883 (Method 3015), 8KV , Note 2
Positive Transients
Negative Transients

typ. +13
typ. -13

V
V
Capacitance, VIN=0V DC, f=1MHz
typ. 45 max. 65
pF

GENERAL DIE INFORMATION
Substrate Thickness (mils) Die size (mils) Bonding pads Backside metal
SiO2 / Silicon 10±2 40 x 20 ±3 per drawing, pure tin Sn or SnPb solder, bumps height 5 mils (±1 mil) none
All Semiconwell products are available in die form for chip and wire hybrid circuits and multi chip modules applications. Typical delivery for standard die products is 3-4 weeks ARO. For Chip Scale Packaged (CSP) devices consult factory for an update on availability of certain products.

DIODES RESISTORS CAPACITORS
The diodes offer basic ESD protection, with low forward voltage, low leakage and low power dissipation in OFF state. Ultra stable TaN with low TCR <75ppm/°C typical. For Rsq<10W/sq and Rsq>500W/sq, resistive material is proprietary. Power rating/resistor max 100mW for R<1KW and 25mW for R>1KW. Standard tolerance is ±5%. Silicon nitride dielectric, MNOS capacitors exhibit high stability, low temperature coefficients, low leakage <10nA and high BV>50V.

DIE LAYOUT PACKAGE PIN OUT

Dimensions are in mils [µm]

STANDARD PRODUCTS ORDERING INFORMATION

SW PART # QUANTITY CSP U/P($)
SWDN3401   5,000pc -CSP  
SWDN3401 10,000pc -CSP  
For products sold as bare tested die or known good die KGD, minimum order is 5000pc. Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For special die level KGD requirements, different packaging or custom configurations, contact sw_sales@semiconwell.com

  Semiconwell P/N Quantity E-mail    
Receive Instant Quote
 

Delivery for packaged RCD standard products is 6-8 weeks ARO. Certain items may be available from stock. For standard products available from stock, there is a minimum line item order of $250.0. Inventory is periodically updated. For 2500pc or larger orders, all surface mount packaged devices are shipped in tape on reel (T/R). For smaller quantities, it may vary. Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. On line Orders have to be verified, accepted and acknowledged by Semiconwell sales department in writing before, becoming non cancelable binding contracts.

Semiconwell guarantees continuous supply and availability of any of it's standard products provided minimum order quantities are met.

SEMICONWELL has made every effort to have this information as accurate as possible. However, no responsibility is assumed by SEMICONWELL for its use, nor for any infringements of rights of third parties which may result from its use. SEMICONWELL reserves the right to revise the content or modify its product line without prior notice. SEMICONWELL products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent.

Home Product Tree Tech. Support Print PDF Packages Request Quote Inventory Place Order Contact sales