Vishay RMKM S714 series of molded 50 mil pitch thin film dual in line resistor networks same as SWRCRNS714 DUAL IN LINE RESISTOR NETWORKS manufactured by SEMICONWELL
DUAL IN LINE RESISTOR NETWORKS SWRCRNS714
FEATURES APPLICATIONS SCHEMATIC
Tight T.C. tracking Precision voltage dividers
Tolerance ±1% to ±0.1%, ratios ±0.5% to ±0.05% OP AMP gain control
Low temperature coefficient ±25ppm/°C Precise Attenuation
Low noise Pull-up/pull-down
Rapid rise time TTL/MOS interfacing
SHORT PRODUCT APPLICATION NOTE
The SWRCRNS714 series of small outline surface mount style molded package can accommodate resistor network to your particular application requirements in compact circuit integration. The resistor element is a proprietary Tantalum Nitride film formulation on silicon. Utilizing those networks will enable you to take advantage of parametric performances which will introduce in your circuitry high thermal and load life stability together with the added benefits of low noise and rapid rise time. Precision resistor array offers a high degree of stability, low noise and the proven reliability characteristics of Tantalum Nitride. These devices are manufactured using advanced Thin Film Technology. A wide range of resistor values is available, as well as various absolute and ratio tolerances and TCRs..
SEMICONDUCTOR-THIN FILM MANUFACTURING PROCESS DESCRIPTION
Integrated passive networks are manufactured using advanced thin film technologies including ultra -stable and self passivating Tantalum Nitride resistors, gold interconnect metallization and reliable MNOS capacitors to achieve excellent uniformity, performance and reliability. Thin film resistor technology is the preferred solution for all applications that require low noise, long term stability and excellent performance at very high frequencies. Semiconwell employs proprietary thin film technologies for deposition of a wide range of sheet resistance films from 1 W/sq to 10,000 W/sq. All Semiconwell's products are available in die form and as KGD, known good die and are ideal for high reliability hybrid and multi chip module applications. Besides thin film resistors, Semiconwell integrates capacitors, Schottky diodes, Zener diodes and transistors. Integrated passive and active networks are manufactured using Semiconwell's in house high reliability semiconductor manufacturing processes. All semiconductor devices employ precision doping via ion implantation, silicon nitride junction passivation, platinum silicided contacts and gold interconnect metallization for best performance and reliability. MNOS capacitors and Tantalum Nitride resistors are easily integrated with Schottky diodes to provide complete standard and custom RCD solutions. In die form, these products are ideal for hybrid and multi chip module applications. In packaged form, these products are the best solution where space and weight are a concern.
Capacitance [pF] Tolerance q [%] Power Rating [mW]
<5pF Absolute:±0.1 to ±1 Ratio: ±0.5 to ±0.05 50mW resistor 250 mW@70°C package
Stresses beyond listed absolute maximum ratings may cause permanent damage to the device.
PARAMETER VALUE UNITS
Resistance range 500 to 200000 W
TCR, tracking, - 55°C to ± 125°C ±5 max ppm/°C
TCR, Absolute ± 15ppm (- 55°C to ± 125°C) ± 10 (0°C to + 70°C) ppm/°C
Tolerance, ratio 0.05% to 0.5% %
Tolerance, Absolute ±0.1 to ±1 %
Operating Voltage,-55 to +125 °C max 100 Vdc
Power Rating (per resistor) @70°C (Derate linearly to zero @150°C) max 50 mW
Thermal Shock, Method 107 MIL-STD-202F max ±0.5 % @DR
High Temperature Exposure,100Hrs@150°C Ambient max ±0.25 % @DR
Moisture Resistance, Method 106 MIL-STD-202F max ±0.5 % @DR
Life, Method 108 MIL-STD-202F (125°C/1000hr) max ±0.5 % @DR
Stability DR, absolute, 2000hours @70°C 0.05 %
Stability DR, ratio, 2000hours @70°C 0.02 %
Insulation Resistance @25°C min 1012 W
Shelf Life Stability (Ratio) 1 yr @25°C 50 ppm
Moisture Sensitivity Level 1 (per IPC/JEDEC ) 1 1
GENERAL DIE INFORMATION
Substrate Thickness (mils) Die size (mils) Bonding pads Backside metal
SiO2 / Silicon 10±2 4x4 mils, 3mm thick, 99.99% electroplated gold with a TiW barrier Au/Si compatible with eutectic and conductive epoxy die attach.
All Semiconwell products are available in die form for chip and wire hybrid circuits and multi chip modules applications. Typical delivery for standard die products is 3-4 weeks ARO. For Chip Scale Packaged (CSP) devices consult factory for an update on availability of certain products.
CONDUCTORS RESISTORS BACKSIDE METAL
The bonding pads of the resistors are 3µm thick, 99.99% electroplated gold with a TiW barrier that withstands 30 min at 400°C in air without loss of adhesion. Resistive material is ultra stable TaN with low TCR <75ppm/°C typical. For Rsq<10W/sq and Rsq>500W/sq, the resistive material is proprietary. Power rating/resistor max 100mW for R<1KW and 25mW for R>1KW. Standard tolerance is ±5%. Backside of the die is metallized with standard Si/Au compatible with eutectic and epoxy die attach. Custom metallizations are available upon special request for die products only.
STANDARD PRODUCTS ORDERING INFORMATION
Tolerance absolute, ratio R(W) R CODE R CODE SOIC-14 BARE DIE
0.1% 0.05% 1000 1002 SWRCRNS714/1002-A-14SO SWRCRNS714/1002-A-BD
0.1% 0.1% 1000 1002 SWRCRNS714/1002-B-14SO SWRCRNS714/1002-B-BD
0.5% 0.1% 1000 1002 SWRCRNS714/1002-C-14SO SWRCRNS714/1002-C-BD
1% 0.5% 1000 1002 SWRCRNS714/1002-D-14SO SWRCRNS714/1002-D-BD
For custom products sold as bare tested die or known good die KGD, minimum order is 5000pc. Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For special die level KGD requirements, different packaging or custom configurations, contact email@example.com
CUSTOM PRODUCTS ORDERING INFORMATION - P/N BUILDER
R1 R1 multiplier Tolerance Package
R R multiplier Absolute, Ratio Package
Note1: The first 3 digits are significant figures and the last digit specifies the number of zeros to follow (10 exponent), i.e. (nnn)x10M. If less than 4 digits, it means the absolute value, and it might include decimal point. Note2: For different values than listed on P/N Builder above (standard EIA E192), please use the RFQ link located on the bottom of this page.
Semiconwell P/N Quantity E-mail
Delivery for packaged Resistor networks standard products is 4-6 weeks ARO. Certain items may be available from stock. For standard products available from stock, there is a minimum line item order of $250.0. Inventory is periodically updated. For 2500pc or larger orders, all surface mount packaged devices are shipped in tape on reel (T/R). For smaller quantities, it may vary. Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. On line Orders have to be verified, accepted and acknowledged by Semiconwell sales department in writing before, becoming non cancelable binding contracts.
Semiconwell guarantees continuous supply and availability of any of it's standard products provided minimum order quantities are met.
SEMICONWELL has made every effort to have this information as accurate as possible. However, no responsibility is assumed by SEMICONWELL for its use, nor for any infringements of rights of third parties which may result from its use. SEMICONWELL reserves the right to revise the content or modify its product line without prior notice. SEMICONWELL products are not authorized for and should not be used within support systems which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent.